SmartctlSelf-test

2023年12月20日 — The SMART test can be performed to detect any potential problems with the hardware itself. Tests such as these are run using smartctl. According ...

2008年9月21日 — Testing has begun. Please wait 2 minutes for test to complete. Test will complete after Sat Dec 18 17:10:35 2010 Use smartctl -X to abort test.

2016年11月2日 — (Self-Monitoring Analysis and Reporting Technology )技術,他可以根據檢測屬性的結果來決定該顆硬碟的使用是否快故障. 測試環境為Ubuntu14.04 x86_64.

2022年7月10日 — I want to test my SSD. It seems that I can start a self test with smartctl, but when I try to display test's results, I don't see anything.

2022年7月29日 — Look near the top of the disk's information and you'll see a remaining status on the currently running selftest. Look for the section named  ...

2015年5月9日 — In smartctl -a <device> look for Self-test execution status . Example when no test is running: Self-test execution status: ( 0) The previous ...

2022年3月5日 — I need to test an hdd because the smart control on OVM mark it as bad, then I'm trying to run a test, first i run this sudo smartctl -a ...

2019年5月2日 — Drive command Execute SMART Short self-test routine immediately in off-line mode successful. Testing has begun. Please wait 2 minutes for test ...

2024年5月24日 — smartctl is a command-line tool that controls the Self-Monitoring ... Short self-test routine recommended polling time: ( 1) minutes.

2020年5月26日 — Under Linux, you can read the SMART (Self-Monitoring, Analysis and Reporting Technology) information from the hard disk using smartctl.